Product range

SCHWINGMETALL® Compression/shear mounts

are the preferred choice for cushioning small to moderate masses in all areas of machine, apparatus and engine engineering.

SCHWINGMETALL® Railstrips / Railstrip sections

are particularly well suited to cushioning heavy and extra-heavy machines.

SCHWINGMETALL® Buffers

are used in combination with cushioning supports mounts to limit vibration amplitudes and to absorb forces generated by belt pull.

enhance the properties of compression/shear mounts or railstrips; they are designed for inclined mounting situations and natural frequencies ...

are assembly mounts for medium-sized loads and are good for practically every application. The high degree of radial stiffness ...

SCHWINGMETALL® Rail strips

are particularly well suited to cushioning heavy and extra-heavy machines.

SCHWINGMETALL® Torsion Bush

The torsion bush allows for joltless transmission of torque. The elasticity of this bush allows for minor mis alignments and angle errors of both ends of the shaft.

are assembly mounts with a wide range of applications. They generally used in such a way that the static load acts in a z-direction. ...

SCHWINGMETALL® Instrument Mounts

This construction is for masses from 5 kg to 220 kg. It offers uniform stiffness in all directions.

SCHWINGMETALL® Bell Mount

are designed for static tension loads and are thus suited to applications invilving the cushioned mounting of masses (from 2 to 70 kg).

SCHWINGMETALL® Shear Mounts

This line is especially suited to supporting minor masses (from 2 to 25 kg per mounting point) at low natural frequencies.

SCHWINGMETALL® Ring Mount

The four-part outer ring of the ring mount is pressed into an undersized orifice. In this way a shaft inserted into the other bush can be elastically mounted.

SCHWINGMETALL® Torsion Mount

are suitable for elastically affixing the ends of shafts on even surfaces. The mount allows for axial, radial, torsional and cardanic movements, each with their own spring stiffness.

represent an easily realised and sturdy mounting solution for masses from 20 to 240 kg. Thrust plates are required at the upper and lower ends to reliably protect ...

solve the problem of level-controlled, attachment-free mounting of machines and assemblies. They are specially ...

This module is suitable from 20 to 350 kg and is espially interesting wherever vibrations are accompanied by annoying impacts ...

The robust and non-tear-off Hydromount K series, with high lateral stiffness and the hydraulic damping ...

These mounts are especially appropiate for loads from 40 to 550 kg. Very low natural frequencies are attained. High damping forces keep the system ...